FPIC Archive 2: Training day

{:deps {org.clojure/clojure {:mvn/version "1.10.1"}
        ;; complient is used for autocompletion
        ;; add your libs here (and restart the runtime to pick up changes)
        compliment/compliment {:mvn/version "0.3.9"}}}
deps.edn
Extensible Data Notation
{:hello (clojure-version)}
0.1s
Clojure

Fork this

https://github.com/iloveponies/training-day

If you followed through the instructions in the last section of the previous chapter, you already have this repository forked, cloned and ready to go. If you missed the instructions, here is a link.

We come gifting bears

When in doubt, do exactly the opposite of CVS. Linus Torvalds

You should now have a directory called training-day. This directory contains a Leiningen project we have lovingly hand-crafted just for you. It has unit tests for the exercises, more about these in a minute. Lets first focus on the stuff inside src.

If you are using Light Table and you followed the instructions from the last chapter, you should have an Instarepl open for the training-day project. If you don’t, now is a good time to go through those instructions.

If you are using some other editor, just open the file src/training_day.clj.

Inside the file src/training-day.clj are stubs for all the exercises that require coding. For example this stub:

(defn square [n] ":(")

When you are solving the exercises, you are to modify these stubs and run the tests to see if you got it right.

Testing, testing, 1 2 3

Speaking of testing, let’s run the unit tests now. This will output a lot of somewhat superfluous information while Leiningen downloads the project dependencies, so you will see more output printed than what is shown below. This output is printed only once, so subsequent runs will not be so chatty.

me@my-computer:~$ cd training-day/ me@my-computer:~/training-day$ lein midje

Leiningen tells us it’s downloading the whole internet:

Could not find metadata lein-midje:lein-midje:2.0.0-SNAPSHOT/maven-metadata.xml in central (http://repo1.maven.org/maven2) Retrieving lein-midje/lein-midje/2.0.0-SNAPSHOT/maven-metadata.xml (1k) from http://clojars.org/repo/ …Skip…

And finally, the output we are interested in:

FAIL "answer" at (training_day_test.clj:6) Expected: 42 Actual: ":(" FAIL "square" at (training_day_test.clj:9) Expected: 4 Actual: ":(" FAIL "square" at (training_day_test.clj:10) Expected: 9 Actual: ":(" FAIL "average" at (training_day_test.clj:13) Expected: 3 Actual: ":(" FAIL "average" at (training_day_test.clj:14) Expected: 3/2 Actual: ":(" FAILURE: 5 facts were not confirmed.

This tells us that all the test failed. Which was expected, as you haven’t done any of the exercises yet.

Our project uses the Midje testing library. To ease distributing changes to the tests, the actual test code is in a separate project. The easiest way to look at the code is to use Github. For every chapter there is a repository with the same name and a “-tests” suffix. This repository is where the tests live. Here’s a link to the file containing the tests for this chapter. Just click it. In the file are blocks of code that look like this:

(facts "square" (square 2) => 4 (square 3) => 9)

The facts form declares some facts of the square function. A fact, in Midje, is an expression expr => expected-value, saying “Evaluating expr should return expected-value”. Our two tests (or facts) say that (square 2) should return 4 and (square 3) should return 9.

Our stub for square simply returns the string ":(" for all values of n. This does not pass the tests, which we saw above. The relevant output was:

FAIL "square" at (training_day_test.clj:9) Expected: 4 Actual: ":(" FAIL "square" at (training_day_test.clj:10) Expected: 9 Actual: ":("

The FAIL lines indicate that our stub function fails the tests as expected, because the string ":(" is not 4 or 9.

Run lein midje often to see if your code is working or not. You can also run lein midje :autotest to start a loop that runs the tests every time you make changes to the code.

Interactive Clojure

One of the nice features of Clojure is the REPL. It is an interactive session in which you can write code and see it executed immediately. Here you have two choices. Light Table has a really nice REPL called Instarepl, and Leiningen provides the classical REPL. We encourage you to test out Instarepl even once. It’s pretty awsome.

Light Table

Follow the installation instructions found in the previous chapter if you haven’t already. In Linux, you run the file LightTable as you would run any binary. The previous chapter has instructions for opening an instarepl.

Good ol’ repl

If you don’t want to use Light Table, there is always the lein repl. Issue that command in the terminal and an interactive Clojure session starts. It should look like this:

me@my-computer:~$ lein repl nREPL server started on port 50443 Welcome to REPL-y! Clojure 1.5.0 Exit: Control+D or (exit) or (quit) Commands: (user/help) Docs: (doc function-name-here) (find-doc "part-of-name-here") Source: (source function-name-here) (user/sourcery function-name-here) Javadoc: (javadoc java-object-or-class-here) Examples from clojuredocs.org: [clojuredocs or cdoc] (user/clojuredocs name-here) (user/clojuredocs "ns-here" "name-here") user=>

If you type (+ 1 2) and press the return key, you should see this:

user=> (+ 1 2) 3 user=>

Clojure evaluated the expression (+ 1 2) and printed its value, 3. If you see something different, please let us know by raising your hand.

Notation

In our example code, we often want to show the result of an expression when it is evaluated. Instead of showing what evaluating the expression in the interactive session looks like:

user=> (+ 3 4) 7

We’re going to use the convention of writing the expression and the result, separated with ;=>. Quite like how Light Table does it. For an example:

(+ 3 4) ;=> 7

Sometimes we will put the result on a new line:

(str 1337) ;=> "1337"

Hint

str is a function that turns its argument to a string. If given multiple arguments, it concatenates the results:

(str "Over " 9000 "!") ;=> "Over 9000!"

When the resulting value is too long to display on one line, we will mark the continuation lines with a leading ; like this:

(take 20 (cycle ["foo" "bar"])) ;=> ("foo" "bar" "foo" "bar" "foo" "bar" "foo" "bar" "foo" "bar" ; "foo" "bar" "foo" "bar" "foo" "bar" "foo" "bar" "foo" "bar")

; starts a comment that lasts until the end of that line, like // in Java. The => inside the comment is an illustration of an arrow, meaning “evaluates to”. You can copy the examples above to the REPL and they will work without modification:

user=> (+ 3 4) 7 user=> (+ 3 4) ;=> 7 7 user=> (+ 3 4) ; I am a comment 7

Prefix Syntax

As you can see above, instead of writing 1 + 2 to calculate the sum of one and two, we write (+ 1 2). This syntax applies everywhere in Clojure. In fact, Clojure has no operators at all. In languages such as Java or C, arithmetic operations are usually written in the mathematical notation called infix form. Clojure, on the other hand, uses prefix form for its syntax. The next table shows what mathematical expressions look like in these two syntaxes.

JavaClojure2 + 3(+ 2 3)42 * 7(* 42 7)2 - 78 * 35(- 2 (* 78 35))1 + 2 + 3 + 4(+ 1 2 3 4)

Let’s input these definitions in our Clojure session to see how they work:

user=> (+ 2 3) 5 user=> (* 42 7) 294 user=> (- 2 (* 78 35)) -2728 user=> (+ 1 2 3 4) 10

Exercise 1

Write the following expression in the Clojure prefix syntax: \((2 * 3) + 4\). Try evaluating it in the REPL. The result should be 10. This exercise does not give any points and you do not need to return it.

Exercise 2

Write the expression \(3 + 4 + 5 + 6\) in Clojure syntax. Evaluate it in the REPL. This exercise does not give any points and you do not need to return it.

The arithmetic operations have some special properties. Everyone of the operations works with only one operand.

(+ 1) ;=> 1 (* 2) ;=> 2 (- 3) ;=> -3 (/ 4) ;=> 1/4

This behavior might seem odd, but here is the catch. The arithmetic operations above are, in fact, function calls. That is, + is actually a function (called +), as are * and -. Don’t believe use? Write just + in the REPL. In Instarepl you see

+ => fn

and in lein repl

user=> + #<core$_PLUS_ clojure.core$_PLUS_@2d21471c>

They are both telling you that + is just a function.

All function calls in Clojure look the same: (function-name argument-1 argument-2 ...). As an example of a non-arithmetic function, let’s take a look at getting a single character from a string in Clojure and Java. In Clojure, we can use the get function for this:

(get "Clojure" 2) ;=> \o

The result is the character o, printed in Clojure’s literal character syntax. (That is, \o in Clojure code means the single character o. In Java, you would write a literal character as 'o'.)

In Java, we reorder things a bit: the first parameter goes before the method name, and the parentheses are moved after the method name:

"Java".charAt(2); //=> 'v'

In Clojure, the function name always goes first, and the parameters come after it, including the object, if such is present. The Clojure syntax might take some time to get used to, but becomes natural after you’ve written a few Clojure programs.

Exercise 3

Write a Clojure expression in the REPL that, using get, gets the first character in the string "abrakadabra". This exercise does not give any points and you do not need to return it.

Functions

So far we’ve worked with expressions and called some existing functions. For structuring any kind of non-trivial programs, we will want to group code into our own functions.

Lets start writing a function (hello who), which returns an English greeting for the user. Functions are created with fn. Write the following in you REPL and evaluate it.

(fn [who] (str "Hello, " who "!"))

The REPL should tell you that it was a function. Instarepl just says

(fn [who] (str "Hello, " who "!")) fn

As usual, lein repl is a bit more verbose and states

user=> (fn [who] (str "Hello, " who "!")) #<user$eval326$fn__327 user$eval326$fn__327@4a2d09aa>

So what kind of a function did we actually get? Inside the square brackets are the parameters of the function. This one only has a one and we gave that a name who. Right after that comes comes an expression, a call to a function str in this case. The value of this expression will become the return value of this function. In general, the return value of a function will be the value of the last expression in the function.

So we got a function. Lets call it!

((fn [who] (str "Hello, " who "!")) "Jani") ;=> "Hello, Jani!"

That worked just like with + and the others. First comes the function, then the arguments. In this case the function does not have a name so we need to write the whole definiton. We also have only one argument, "Jani".

Exercise 4

Call the following function in the REPL with your name.

(fn [name] (str "Welcome to Rivendell mr " name))

This exercise does not give any points and you do not need to return it.

Now we know how to make a function, but we only got a glimpse of it and then it was gone. We have to write the definition of the function every time we want to call it. But we want something more permanent, something that we can write once and call multiple times! The functions created with fn are called anonymous functions. They are called that because they have no name. To give a name to a function we can use def. Let’s give the greeter function a name right away.

(def hello (fn [who] (str "Hello, " who "!")))

That definition is also an expression, so don’t forget to evaluate it. Now we can call this function. Write (hello "beautiful") in your REPL to get a instant compliment. In the name of sex-equality evaluate also (hello "handsome").

So what just happened? Well, def gives a name to a value. In the previous case the value is what we get when we evaluate (fn [who] (str "Hello, " who "!")). And what do we get when we evaluate that? A function. So we gave the name hello to a function that gives out greetings.

Exercise 5

Give a name answer to the answer to life the universe and everything. This is the first exercise in which you need to modify the file src/training_day.clj. Remember to run the tests with lein midje.

aswer ;=> 42

Anonymous functions have their uses in functional programming. So it is nice to know that we can create them with fn. But most of the time we want to give the function a name right away. To make that a bit easier, we have defn. Here is how to create and name the previous function with defn. There is a running commentary alongside, to make sure we understand its parts.

(defn ; Start a function definition: hello ; name "Gives out personalized greetings." ; a optional docstring [who] ; parameters inside brackets (str "Hello, " who "!")) ; body

Here hello is the name of the function, [who] is the parameter list, and the expression on the second line is the body of the function. The return value of the function is the value of the last expression inside the function body. In this case, it is the value of the (str "Hello, " who "!") expression. We have also provided an docstring that briefly tells what this function does. This is optional, but like washing your hands after visiting the toilet, highly recommended.

For comparison, our function looks like this in Java:

/** * Gives out personalized greetings. */ String hello(String who) { return "Hello, " + who + "!"; }

Note that in Clojure, there is no return keyword. The return value of a function is always the value of the last expression in the function body.

Hint

Want to take a look at the docstring of some function? You can use the doc function to do so. Unfortunately you need to do some tricks to get your hands at this function. But don’t worry, it’s not difficult.

user=> (use 'clojure.repl) user=> (doc +) ------------------------- clojure.core/+ ([] [x] [x y] [x y & more]) Returns the sum of nums. (+) returns 0. Does not auto-promote longs, will throw on overflow. See also: +' nil

You can also see the docstring of our hello function. Evaluate the following in your REPL.

(use 'clojure.repl) (doc hello)

You can also use (user/clojuredocs function) to see some examples for function. This should work for most of the built-in functions.

user=> (user/clojuredocs min) ========== vvv Examples ================ user=> (min 1 2 3 4 5) 1 user=> (min 5 4 3 2 1) 1 user=> (min 100) 100 ========== ^^^ Examples ================ 1 example found for clojure.core/min nil

The next section will tell you more about the function use.

Files and Namespaces

Code in Clojure projects is structured into namespaces defined in files. Usually each file corresponds to a one namespace identified by the file’s path. For an example, the file foo/bar/baz.clj could contain the namespace foo.bar.baz. This is slightly different from Java, where directories correspond to namespaces (packages) and files under a directory usually contain a single class in the given package.

The repository that you cloned at the end of the last chapter contains an Leiningen project. Inside the src directory are all the code files of the project. The file training_day.clj should begin with the following.

(ns training-day)

This is a namespace definition. It tells us that the code in this file is in the namespace training-day. There are no dots in the namespace name as there is no directories under src, just the lonely file training_day.clj.

Watch out!

See how the namespace is called training-day, but the file is training_day.clj? This is intentional. If a namespace name has an hyphen, the corresponding file name should have an underscore.

We are at cross roads. Choose to right set of instructions based on your REPL.

Hint

Light Table

You need to first connect to the project training-day. When you then open an instarepl, LigthTable should ask you to which project you want to connect. Select training-day. Instructions for all this are in the previous chapter.

lein repl

Navigate to the directory training-day, and run lein repl.

Now as you have your REPLs open, write the following in it.

(use 'training-day) hai

Were you greeted in all CAPS? If not, please raise your hand.

What use did was that it looked inside the namespace training-day and brought with it all the names defined in that namespace. The name hai was one of them.

Watch out!

The ' before the namespace name in a use is important. If you forget it, you will get an error like this:

user=> (use example.hello) java.lang.ClassNotFoundException: example.hello (NO_SOURCE_FILE:1)

' is an alias for the quote special form, which we will talk more about later.

Time to submit

Here are two exercises more to keep your fingers warm.

Exercise 6

Write the function (square x) that takes a number as a parameter and multiplies it with itself.

(square 2) ;=> 4 (square 3) ;=> 9

Exercise 7

Write the function (average a b), which returns the average of its two parameters:

(average 2 4) ;=> 3 (average 1 2) ;=> 3/2

Now would be the time to submit your solutions to be graded. Run lein midje to see if all the tests pass. If the do, you should see the following:

me@my-computer:~/training-day$ lein midje All claimed facts (5) have been confirmed.

Don’t worry if you haven’t figured out all the exercises. You can still submit those that you have successfully made. Here is how to do it.

  1. Create a commit of your changes by running

    git commit -a -m "message here"

  2. Update your fork in Github by pushing the changes. This will ask for your Github login.

    git push

  3. Go to the Github page of your fork of the repository training-day. Click on the green Compare & review button. When you are ready, click Send pull request.

If you didn’t submit the solutions all at once, or some of the submited ones were incorrect, you can re-submit as many times as you need to. Just fix the code and follow the steps 1 and 2 again. When you push, the open pull request is updated.

Proceed to the horse feast! →

Runtimes (1)